Remote Control

Application

Fiber optic solutions can be used for remote control in various applications, offering advantages like long-distance transmission, high bandwidth, and immunity to electromagnetic interference. These solutions often involve fiber optic switches for rerouting signals, remote monitoring systems for tracking network health, and specialized devices for extending the reach of control signals.

In addition to its various fiber optic modules in different form factors, OptoMedia Technology Inc. (OM) offers HDMI Fiber Extenders and RJ45 to Fiber Media Converters with Industrial Power, Power over Ethernet (PoE) or Power over USB to support partners’ integration. Never less to say, the company’s miniature modules also bring value to future-proof compact desktop receivers in thin client architecture.

Recommended Products

10G-LRThe PT0-S1-4103x-I of Enhanced Small Form Factor Pluggable (SFP+) transceiver module is specifically designed for high performance integrated data link over single mode optical fiber. The high-speed laserdiode and photodiode are provided as a light source and a detector, respectively. Digital diagnostics monitoring information and detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol.

10G-SRThe PT0-M3-4D33x-C5 of the Enhanced Small Form Factor Pluggable (SFP+) transceiver module is designed for high performance integrated data link over dual multi-mode optical fibers. The high-speed laser diode and photodiode are provided as a light source and a detector, respectively. Digital diagnostics monitoring information and detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFF 8472, SFF 8431 and IEEE 802.3ae 10GBASE-SR.

10G-ERThe PT0-S2-4403L-I of Enhanced Small Form Factor Pluggable (SFP+) transceiver module is specifically designed for high performance integrated data link over single mode optical fiber. The high-speed laserdiode and photodiode are provided as a light source and a detector, respectively. Digital diagnostics monitoring information and detailed product information for the host equipment is accessed by the 2-wire serial interface. It complies with SFF-8472, SFF-8431, SFF-8432, 10GFC, Class 1 laser products, and IEEE802.3ae 10GBASE-ER/EW.

155M Single-Mode

155M Single-ModeThe PT1-S1-4203x of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated duplex data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFP MSA, SONET/SDH standards, Class 1 laser products, EN60825, and EN60950.

155M Multi-Mode

155M Multi-ModeThe PT1-M4-4023x of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated duplex data link over multi-mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol.

1.25G Single-Mode

1.25G Single-ModeThe PT4-S1-4103x-I of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated duplex data link over single mode optical fiber. The high-speed laser diode and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol.

1.25G Multi-Mode 850nm

1.25G Multi-Mode 850nmThe PT4-M3-4D53x-I of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated duplex data link over multi mode optical fiber. The high-speed oxide VCSEL and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol.

1.25G Multi-Mode 1310nm

1.25G Multi-Mode 1310nmThe PT4-M4-4023x of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for high performance integrated duplex data link over multi mode optical fiber. The high-speed oxide VCSEL and photo diode are provided as a light source and a detector, respectively. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol.

1G Copper SFPThe PT4-C0-7D13L-D3 integrates SGMII and SerDes functionality. This 1000BASE-T copper small form pluggable (SFP) transceiver is compliant with the SFP multi-source agreement (MSA) and provides an RX_LOS pin for link indication.

It also supports DDM (Digital Diagnostics Monitoring) for temperature and voltage tracking, enabling real-time module monitoring via I2C. The transceiver complies with RoHS standards and achieves a transmission distance of up to 100m at 1Gbps.

155M Multi-Mode Mini SFF

155M Multi-Mode Mini SFFThe MT1-M4-4023x Multi-mode optical transceiver is 1 x 11 mini transceiver with LC connector. This Multi-mode transceiver is low power, high performance module for such as Gigabit Ethernet and Fiber Channel communications.

The transmitter section uses a Fabry-Perot laser (FP) at 1310 nm. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol.

1.25G Single-Mode Mini SFF

1.25G Single-Mode Mini SFFThe Single-mode optical transceiver is 1 x 11 mini transceiver with LC connector. This transceiver is low power, high performance module for such as Gigabit Ethernet and Fiber Channel communications.

The transmitter section uses a Fabry-Perot laser (FP) at 1310 nm. An EEPROM contained the detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with Gigabit Ethernet, SONET/SDH standards, Class 1 laser products, and EN/UL 62368.

1.25G Multi-Mode Mini SFF

1.25G Multi-Mode Mini SFFThe Multi-mode optical transceiver is 1 x 11 mini transceiver with LC connector. This transceiver is low power, high performance module for such as Gigabit Ethernet and Fiber Channel communications.

This module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm. The transmitter section uses a Vertical-cavity surface-emitting laser (VCSEL) at 850 nm. This is a class 1 laser compliant according to International Safety Standard IEC-825.

The receiver section uses an integrated GaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A LVPECL logic interface simplifies interface to external circuitry. Operating temperature is from -40℃ to 85 ℃.

10G Single-Mode Mini SFF

10G Single-Mode Mini SFFThe MT0-S1-4103L-I single-mode optical transceiver is a 1 x 12 pin mini transceiver with LC connectors. This single-mode transceiver is low power, high performance module for such as 10Gigabit Ethernet and Fiber Channel communications. The transmitter section uses a DFB laser at 1310 nm.

Digital diagnostics monitoring information and detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFF-8472, SFF-8431, SONET/SDH standards, Class 1 laser products.

10G Multi-Mode Mini SFF

10G Multi-Mode Mini SFFThe multi-mode optical transceiver is a 1 x 12 pin mini transceiver with LC connectors. This multi-mode transceiver is low power, high performance module for such as 10Gigabit Ethernet and Fiber Channel communications. The transmitter section uses a VCSEL laser at 850 nm.

Digital diagnostics monitoring information and detailed product information for the host equipment is accessed by the 2-wire serial CMOS EEPROM protocol. It complies with SFF-8472, SFF-8431 and IEEE 802.3ae, Clause 52, 10GBASE-SR.

155M Single-Mode | SC Connector

155M Single-Mode | SC ConnectorThe series is high performance module for dual fiber communications by using 1310 nm transmitter and 1310 nm receiver. The transceiver is provided with the SC receptacle that is compatible with the industry standard SC connector. Also, it is a class 1 eye safety product according to International Safety Standard IEC-825. A LVPECL logic interface simplifies interface to external circuitry.

155M Single-Mode | ST Connector

155M Single-Mode | ST ConnectorThe series is high performance module for optical fiber communications by using 1310 nm transmitter and 1310 nm receiver. The transceiver is provided with the ST receptacle that is compatible with the industry standard ST connector. Also, it is a class 1 eye safety product according to International Safety Standard IEC-825. A LVPECL logic interface simplifies interface to external circuitry. Operating temperature is from 0℃ to 70 ℃.

155M Multi-Mode | SC Connector

155M Multi-Mode | SC ConnectorThe 1×9 SC duplex 1310nm O-E Transceivers can transmit digital data up to 2 km via Multi-mode optical fiber and the optical performances comply with the Fast Ethernet interface, 155Mbps ATM interface and FDDI PMD Standard.

155M Multi-Mode | ST Connector

155M Multi-Mode | ST ConnectorThe 1×9 ST duplex 1310nm O-E Transceivers can transmit digital data up to 2 km via Multi-mode optical fiber and the optical performances comply with the Fast Ethernet interface, 155Mbps ATM interface and FDDI PMD Standard.

1.25G Multi-Mode | ST Connector

1.25G Multi-Mode | ST ConnectorThis is a low power, high performance 1x9 ST duplex transceiver for optical data communications in Gigabit Ethernet and Fiber Channel.

1.25G Multi-Mode | SC Connector

1.25G Multi-Mode | SC ConnectorThe TR4-M3 series is a 1x9 SC duplex 1.25Gbps transceiver. This is a low-power, high-performance module for optical data communications in Gigabit Ethernet and Fiber Channel.

1.25G Single-Mode | SC Connector

1.25G Single-Mode | SC ConnectorThe TR4-S1 is a 1x9 transceiver module designed for high-performance integrated single data link over single-mode optical fiber. The transceiver is provided with an SC receptacle that is compatible with the industry standard SC connector.

HDMI Fiber Extender

HDMI Fiber ExtenderThe VH-20 4K-HDR HDMI over Fiber Extender boosts up your video/audio transmission distance up 10km(6.25miles) over single mode fiber optic cables in Ultra-HD 4K2K@60 format. Users can readily extend Ultra-HD sources from DVD players, Blu-ray Disc player, PS3, PC, and any other HDMI sources broadcasting to distant display monitors including HDMI or DVI enabled TV sets or LCD PC monitors.

* HDR = High Dynamic Range

** The video bandwidth of 4K2K@60 4:2:0 10bits (HDR) is 384MHz, and the 4K2K@60 4:4:4 8 bits is 594MHz

VSDI-12GVSDI-12G fiber media converter is an ideal and economic solution for broadcasting applications. It receives one 12G SDI electrical input, perfectly converts electrical SDI signal to single mode optic SDI signal. The transmitter module receives one 12G/6G/3G/HD/SDI electrical input, perfectly converts SMPTE 292M, SMPTE 259M, SMPTE 424M, SMPTE 2082 or DVB-ASI electrical SDI signal to single-mode optic SDI signals. The receiver module receives optical signal from input SFP connector, and then perfectly converts it to electrical SDI signal. VSDI-12G is immune to pathological pattern (SMPTE RP-198) without introducing any flickers, and this feature further guarantees the transmission quality over optical fibers.

VSDI-3GVSDI-3G fiber media converter is an ideal and economic solution for broadcasting applications. It receives one 3G SDI electrical input, perfectly converts electrical SDI signal to single mode optic SDI signal. It supports transmission image of SDTV (143-540Mbps), HDTV (1.485Gbps) and Full HD (2.97Gbps).

Both transmitter and receiver provide equalizing and reclocking at input unit in order to re-construct the signal for consistent quality. Besides, with ViiTA advanced optic fiber technology, VSDI-3G can easily pass pathological pattern to prove its complete transmission.